Adjustment Program Epson L3210 ((exclusive)) -

The Epson L3210 Adjustment Program (also known as the Epson Resetter or AdjProg) is a specialized utility software used primarily to resolve the "Service Required" error. This error occurs when the printer's internal waste ink pad counter reaches its factory-set limit, causing the printer to stop functioning and display blinking red lights. Core Purpose & Key Features

Q5: After resetting, my printer still shows "Service Required." What now?

You may have one of two problems:

  • Reset counters:

    Locate Counter: Under the Maintenance tab, find and select Waste ink pad counter, then click OK. Check and Initialize: Check the box for Main pad counter. Click Check to see the current point usage. Click Initialize to reset the counter to zero. Adjustment Program Epson L3210

    Enter Maintenance Mode: Click on Particular Adjustment Mode and select Waste ink pad counter from the list. Check & Initialize: The Epson L3210 Adjustment Program (also known as

    Step 3: Read and Reset the Counter

    1. Click “Read” or “Check”. The program will display a percentage or a hex value (e.g., 100% or 0F).
    2. If the value is near 100%, check the “Reset” checkbox.
    3. Click “Initialization” or “Reset”.
    4. Wait 10–15 seconds. The program will display “Success” or “Reset OK”.
    5. Turn the printer off, wait 30 seconds, and turn it back on.

    ⚠️ Warnings