So, you’ve just unboxed your new Anytone AT-D868UV (or the 878). It’s a fantastic handset—rugged, dual-band, and capable of handling DMR, analog FM, and DPMR. But let’s be honest: the out-of-the-box programming is bare-bones. If you want to hit the local repeaters, especially on the DMR network, you need a solid codeplug.
to find frequencies, color codes, and time slots for UK analog and DMR repeaters. Talkgroups (TG) : For digital use, UK hams primarily use the BrandMeister networks. Common TGs include: : Local repeater traffic (Time Slot 2). : UK Wide (Time Slot 1). : Disconnect (crucial for "unlinking" talkgroups). 3. Step-by-Step Programming Guide Read the Radio : Always start by clicking "Read from Radio" anytone 868 codeplug uk
DMR ID: You cannot transmit on digital channels without a unique ID. Register for one at RadioID.net. Getting Started: The Best Anytone 868 Codeplug Resources
For advanced users: Build your own. The Anytone 868 CPS is clunky but powerful. Use the “Import from CSV” feature to mass-add UK repeaters from a spreadsheet. Then create zones by region (e.g., “London,” “Manchester,” “Birmingham”) and by mode (“DMR Only,” “Analogue Only”). Go to Edit > Channel > Add
DMR is where the D868UV excels, but it is also where mistakes multiply. A solid codeplug must distinguish between Private Calls (direct to a specific DMR ID) and Group Calls (talkgroups). For UK use, the most critical decision is how to handle dynamic vs. static talkgroups.
Even experienced hams mess these up. Avoid these pitfalls: