Arduino Sensor Shield V5 0 Manual Info
The Arduino Sensor Shield V5.0 Go to product viewer dialog for this item.
2. Critical First Step: Voltage Selection (The Jumper)
Before plugging in any sensor, locate jumper JV1 (near the power pins). arduino sensor shield v5 0 manual
Beyond the standard pins, the shield includes dedicated interfaces for specialized modules: The Arduino Sensor Shield V5
⚠️ Warning: Do not power more than one or two small servos from the Arduino’s 5V regulator. Use external power for anything larger. Connect servos to D9 and D10
1. Connecting an HC-SR04 Ultrasonic Sensor (Distance)
Project 3: Two Servos + LED
- Connect servos to D9 and D10. Provide external power.
- Connect LED + resistor to D13 (built-in).
3.1. Input Power Options
The shield typically provides a dedicated terminal block for external power input.
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#define SCREEN_ADDRESS 0x3C
Adafruit_SSD1306 display(128, 64, &Wire);
One of the most critical features of the V5.0 is its external power terminal block and SEL jumper . Simple guide to Sensor Shield V5 connections? Docs?