Artcam Pro 9.1 Tutorial ✦ Simple & Free

Getting started with ArtCAM Pro 9.1 allows you to transform 2D artwork into 3D reliefs for CNC machining, jewelry design, and woodworking. Although ArtCAM was discontinued by

3. Creating the 3D Relief

Step 1: Raised Border

Select the outer rectangle.
Click the 3D Relief tab → Shape Editor.
Choose Dome shape.
Set Height = 3 mm, Angle = 45°.
Click Apply – the border rises in the 3D view.

Hours melted away. He learned to dance with the 'Texture Relief Layer' to give the background a hand-hammered finish and used the 'Smoothing Filter' to buff out the digital artifacts. When he finally hit 'Simulate Toolpath,' he watched the virtual ball-nose bit dance across the screen, carving perfectly into the digital wood. artcam pro 9.1 tutorial

Here are some basic operations to get you started: Getting started with ArtCAM Pro 9

Problem: "Vectors are open" warning. Solution: Use Vector > Edit > Join Vectors with a tolerance of 0.001". Zoom in and delete microscopic splinters. Select the outer rectangle

Create or import artwork (vectors or bitmaps).
Prepare vectors (clean, close paths, offset).
Create relief(s) from vectors/bitmaps or sculpt.
Edit and combine reliefs; apply textures.
Set toolpaths; simulate.
Post-process and export G-code.

The ArtCAM Pro 9.1 interface is divided into several sections:

Select the inner rectangle vector (create one inset 0.5" from your outer edge).
Go to the Relief Tab > Create Relief > Shape.
Choose "Dome" .
Set Height: 0.25 inches.
Check "Merge" (this adds to the base material).