Canon Imagerunner 2420 Scanner Setup Upd -

Comprehensive Guide to Canon imageRUNNER 2420 Scanner Setup Setting up the scanner for a Canon imageRUNNER 2420 (iR 2420) can significantly enhance your office productivity. This guide covers the essential steps for configuring remote scanning and scan-to-folder functions on Windows systems. 1. Pre-Setup Requirements Before starting, ensure you have the following:

Hardware: Ensure the optional Network Interface Adapter is installed if you intend to scan over a network.

Verifying the Scanner Setup

Updating the Scanner Firmware (Optional)

Pre-Setup Checklist

Issue 3: "Scanner is in use or not connected"

• Cause: The iR2420 must be in "Scanner Mode" or "Online" mode. Sometimes if the machine is in "Copy" mode, it may not respond to PC requests immediately.
• Resolution: Press the Scanner button on the device panel (if available) or press the Online button to ensure the network interface is active.

The easiest way to configure the machine is through its web interface, the Canon Europe Access Remote UI : Open a web browser and enter the printer's IP address

Step 4.4: Scan via Network

1. Place document.
2. Press Send → Address Book → Select MyPC_Scan.
3. Press Start (Green button).
4. File arrives as a TIFF (default) or PDF (if optional PDF kit installed).