Canon Mg2540s Service Tool
Understanding the Canon MG2540S Service Tool Canon MG2540S Service Tool
- Error Codes: You see error codes like 5B00 or P07 on your computer screen.
- LED Indicators: On the printer, the Alarm light (Orange/B) flashes 7 times in a row repeatedly.
- Message: A popup on your PC states: "Ink absorber is almost full" or "Waste ink absorber full."
The Moment of Truth: The tool will say "001" (Success) or "Error" (Failure). If successful, turn the printer off for 10 seconds, then turn it back on.
button. The green power light should stay solid and not blink, indicating the printer is in Service Mode. Recommended Versions Service Tool V3400 canon mg2540s service tool
Features of Canon MG2540S Service Tool
- Disassemble the printer (remove the scanner unit).
- Locate the white absorbent pad in the bottom-right corner (under the purge unit).
- Remove the pad, rinse it under warm water until water runs clear, then dry it completely (or replace it with a aquarium filter sponge).
- Reassemble the printer, then run the service tool reset.
