Ccna-2v7.0 Case Study -rev B- [PC LEGIT]

The CCNA-2 v7.0 Case Study -Rev B- is a comprehensive capstone project within the Cisco Networking Academy's Switching, Routing, and Wireless Essentials (SRWE) curriculum. It serves as a practical assessment where students must design, configure, and troubleshoot a multi-site enterprise network that reflects real-world deployment challenges. Objectives of the Case Study

• Task: You are usually given a network (e.g., 192.168.10.0/24) and asked to subnet it into different VLANs.
• Check: Ensure your subnets allow for the required number of hosts per VLAN and that you have assigned the correct gateway addresses.

interface g0/1
 switchport trunk encapsulation dot1q  (if needed)
 switchport mode trunk
 switchport trunk native vlan 99
 switchport trunk allowed vlan 10,20,99
 no shutdown

Network Topology

1. Design and implement a small network
2. Configure network devices, including routers, switches, and PCs
3. Troubleshoot common network issues
4. Apply knowledge of network protocols, including OSPF, EIGRP, and VLANs

• VLAN 10: Employees (New York Office)
• VLAN 20: Employees (Chicago Office)
• VLAN 30: Management (both offices)

1. Addressing Table Design

Wireless LAN (WLAN): Set up the Home Router and Access Points with specific SSIDs and WPA2 security. Ensure wireless clients can successfully obtain IP addresses from the DHCP server. 5. Establish Connectivity with Static Routes ccna-2v7.0 case study -rev b-