Danfoss Vlt Error Code 2563 < 95% LIMITED >

Danfoss VLT series drives, there is no single "Error Code 2563." Instead, this likely refers to Alarm 38 (Internal Fault) with a specific sub-code of Overview of Alarm 38

Solution B: Replace Power Card (Moderate Cost)

  • Part numbers vary by frame size (e.g., 130Bxxxx for FC-302).
  • After replacement, manually re-enter motor data (parameters 1-20 to 1-30).

Step 2: Check for Other Fault Codes

Navigate to Parameter 15-40 (FC 302) or equivalent fault log menu. Look for simultaneous alarms such as: Danfoss Vlt Error Code 2563

to monitor the actual position vs. the reference position. If the motor is turning but the position isn't updating correctly, inspect the encoder wiring. Adjust Error Limits Danfoss VLT series drives, there is no single

Bluesky
1