Delphi Ds100e Firmware Update Problem Link < Android >

Title: Delphi DS100E firmware update failed / missing link

Insufficient Power: The VCI (Vehicle Communication Interface) must be connected to a stable 12V power supply, typically via the vehicle's OBD-II port, while also connected to the laptop. delphi ds100e firmware update problem link

1. Short the Test Point: Open the DS100e case. Locate the two gold dots labeled TP1 and GND.
2. Short them with tweezers.
3. While shorting, connect USB to PC.
4. Link: Use SP_MDT_v3.2112.exe (Multi-Port Download Tool) – this ignores the signature check that the standard link fails on.

Never disconnect the cable or turn off the ignition while the device's lights are flashing (typically red), as this can "brick" the VCI. Title: Delphi DS100E firmware update failed / missing

Common error messages (examples)