🌸 Anime Garden

Rp80use Printer Driver Setup ((top)) - Download Rongta

Since Rongta does not have a single global driver download page (drivers are typically hosted on regional distributor sites), the instructions below focus on the most reliable method to find, download, and install the correct driver.

Storage: Keep paper away from direct sunlight, high humidity, or temperatures above 70°C to prevent fading. Installation Steps Driver Download - Rongta Tech download rongta rp80use printer driver setup

3) Prepare your system

  • Unplug the printer or turn it off before installing drivers (recommended for USB).
  • On Windows: temporarily disable antivirus only if installer is blocked (re-enable after install).
  • On macOS: allow installation from identified developers in System Settings > Privacy & Security if prompted.

: In the installation program (often v2.61 or similar), select Thermal Receipt Printer as the model type and choose the 80mm Series from the dropdown menu. Rongta Tech 3. Configuring the Communication Port Since Rongta does not have a single global

Port Selection: This is crucial for the "USE" model. Select the correct port (usually "USB001" for USB or the specific COM port for Serial). Unplug the printer or turn it off before

  • If VID_067B or VID_1A86 → CH340/CH341 chip (WCH). Driver: CH341SER.EXE.
  • If VID_067B or VID_067B → Prolific PL2303. Driver: PL2303_64bit_Installer.exe.

Part 1: Understanding the Rongta RP80USE Printer

Before downloading anything, you must know which communication method you are using. The RP80USE integrates three ports:

sudo dpkg -i rongta-rp80use-cups-driver.deb
sudo systemctl restart cups