Download !!link!! Votol Software

The Votol tuning software is the primary tool for programming and calibrating Votol EM motor controllers, such as the Go to product viewer dialog for this item. Go to product viewer dialog for this item.

Step 4: Connect the Hardware

  1. Controller Off: Ensure your battery is connected to the Votol but the controller is OFF (no key switch power).
  2. Plug in USB: Connect the Votol programming cable (white 4-pin connector) to the controller's programming port.
  3. Open Software: Run Votol_EM_V3.exe (or your version). Do not click "Connect" yet.
  4. Power ON: Turn on the Votol controller (main contactor/key).
  5. Select COM Port: In the software, click the dropdown next to "COM" and select the port number from Device Manager (e.g., COM3).
  6. Click "Connect": The status bar should turn green or say "Connected."

Authorized Distributors: Platforms like SiAECOSYS and Deller.pro host direct download links for the standard Votol Controller Software and the specific EM-2SP version. Download Votol Software

Check Device Manager: Open "Device Manager" on Windows and look under Ports (COM & LPT). Note the COM port number assigned to the "USB-Serial Port" (e.g., COM3). 3. Installation and First Run The Votol tuning software is the primary tool

Endless Sphere: A "Mega Pack" of firmware and software (v3-37, v3-49, etc.) is available via Endless Sphere Forum. Controller Off: Ensure your battery is connected to

Flux Weakening: A critical feature that boosts motor top speed by weakening the magnetic field, particularly useful for high-speed EV applications.

Diagnostic Tools: Provides real-time data on battery voltage, temperatures, and error codes.

Benefits of Using Votol Software