En 10204 Pdf Hot (2027)
The EN 10204:2004 standard is a global benchmark for material traceability, defining four types of inspection documents supplied to purchasers of metallic products. It ensures that materials like steel plates, bars, and forgings comply with technical delivery conditions. Hierarchy of Certification Types
Broad Scope: While primarily for metallic products, the standard can also be applied to non-metallic materials if specified in the purchase order. Typical Certificate Contents en 10204 pdf hot
: A statement of compliance including non-specific test results (tests based on the manufacturer's general quality control rather than the specific batch you received). Type 3.1 (Inspection Certificate) The EN 10204:2004 standard is a global benchmark
- Tensile test results (Rm, Rp0.2, A%) – often tested at room temperature, but for hot-service materials (e.g., boiler steel 16Mo3, P265GH, P91) may also include elevated temperature yield strength (e.g., at 400°C, 500°C).
- Impact test (KV, Joules) – critical for hot-rolled structural steel (e.g., S355J2+N) with specified test temperature (e.g., -20°C, -40°C).
- Hardness – for hot-finished seamless tubes (e.g., EN 10216-2).
B. Inspection Certificates (Specific Inspection)
These are the most requested documents in the industry. They require the product to undergo specific testing, and the results must be traced to the specific delivery. Tensile test results (Rm, Rp0
- European Committee for Standardization (CEN) website: www.cen.eu
- EN 10204 PDF: Available for download from the CEN website or other online sources
- Industry associations and organizations: Many industry associations and organizations provide guidance and resources on EN 10204 and hot forming.
- Inspection documents: The standard specifies the types of inspection documents that must be provided, including certificates of inspection, test reports, and inspection certificates.
- Testing and inspection: The standard outlines the testing and inspection requirements for steel products, including chemical composition, mechanical properties, and dimensional tolerances.
- Quality assurance: The standard emphasizes the importance of quality assurance and requires that producers have a quality management system in place.
By following the EN 10204 standard and providing accurate and properly certified inspection documents, producers can ensure that their steel products meet the required specifications and are safe for use in various applications.
When purchasing hot-rolled or galvanized products, you will most likely encounter these two certificate types: 1. EN 10204 Type 3.1 (Inspection Certificate) Issued by: The manufacturer.