Equate Ultrasonic Humidifier User Manual
Equate Ultrasonic Humidifier User Manual
Timer: Use the timer button to set the run time for 2, 4, or 8 hours. equate ultrasonic humidifier user manual
- Unplug always before filling, cleaning, or moving the unit.
- Never add essential oils to the water tank or base. Use only the dedicated aroma tray (if equipped) with a few drops of oil on the absorbent pad. Oil will corrode the plastic and ultrasonic disk.
- Use only cool water. Never use hot or boiling water.
- Do not operate without water. Running the unit dry will damage the ultrasonic diaphragm and create a burning smell.
- Keep away from heat sources (stoves, radiators, direct sunlight).
- Do not submerse the base unit in water or any liquid. Wipe with a damp cloth only.
Step 5: Wipe exterior. Use a damp cloth on the outside of the unit. Never submerge the base. Equate Ultrasonic Humidifier User Manual Timer : Use
To prevent mold and bacteria growth, perform regular cleaning: How To Clean and Sanitize a Humidifier Unplug always before filling, cleaning, or moving the unit
To ensure proper performance and avoid damage, follow these standard setup steps: Positioning
- Empty and thoroughly clean tank and base; use distilled water to reduce odor.
: Touch the power button to start at high speed; press again for low speed. : Settings usually cycle through 2, 4, or 8 hours.
- [ ] Unit is on a flat, water-resistant surface.
- [ ] No furniture or electronics within 12 inches.
- [ ] Water tank is filled with distilled/clean water.
- [ ] Tank cap is tight and not leaking.
- [ ] Mist nozzle is pointed toward the center of the room (not at walls).
- [ ] Base reservoir is clean and free of old water.
- [ ] Power cord is not frayed or pinched.