Foxconn Ml194v-0 Motherboard Manual -

The Go to product viewer dialog for this item. (often identified by the UL marking E253117) is not a specific model name but a manufacturing standard code used by Foxconn for various OEM boards found in HP, Dell, and Lenovo systems.

1. Locate the 3-pin jumper near the CMOS battery (CR2032).
2. Move the jumper from pins 1-2 (Default) to pins 2-3.
3. Wait 10 seconds.
4. Move it back to 1-2.

• Open DIMM slot clips.
• Align module notch with slot; press evenly until clips snap.
• For dual-channel, populate recommended slots (usually DIMM_A1 then DIMM_B1) — check silk screen.
• Confirm memory type and maximum supported capacity by BIOS/board label.

17. Technical Specifications (typical / example — verify exact SKU)