Gilbarco Sk700 Programming Manual Patched May 2026

That text refers to the technical documentation for the Gilbarco SK700

3. Grade and Hose Assignment

The SK700 can handle dual or triple hoses. The programming manual details how to assign a logical "grade" (Regular, Plus, Premium) to a physical hose. Gilbarco Sk700 Programming Manual

CC 40 – Pump Identity: Sets the pump numbers for 2-Wire communication. That text refers to the technical documentation for

5. Product & Price Configuration

• Define fuel products (e.g., Unleaded 87, Premium 93, Diesel).
• Set unit of measure (e.g., liters or gallons).
• Enter price digits and decimal placement (e.g., $X.XXX).
• Configure price levels if supported (e.g., retail vs. fleet).
• Map hoses/nozzles to product IDs and price displays.
• Enable grade switching or loyalty pricing if supported by back-office integration.

To develop or program a feature on a Gilbarco SK700 dispenser, you must access the programming mode through the manager keypad using specific security codes. Accessing Programming Mode Define fuel products (e

Security Barriers: Most advanced programming requires a physical security switch or PIN.

Most SK700 units use standard default codes unless changed by the site manager: 2222 (Basic PPU and presets) 1503 (ID and communication settings) 1309 (Calibration and density) 0128 (Master/Cold start access) 2. Essential Command Codes The SK700 uses a Command Code system to navigate its functions. Use the Manager Keypad to enter these codes after logging in. Command Code Updates the Price Per Unit for each grade and side. Assigns the logical Pump Number for POS communication. Cold Start Clears all memory—only used for deep troubleshooting. Clock/Date Sets the dispenser's internal time and date Calibration electronic calibration of the meters. Flow Rates Adjusts the maximum liters per minute 3. Performing a "Cold Start"

3. What to look for in the PDF: