Huawei Lual02 Firmware Flash | File Mt6735m Dead Hang Logo Done Repack

The Huawei LUA-L02 (also known as the Huawei Y3II 4G) runs on the MT6735M chipset. Flashing a repacked stock firmware file is a standard solution for fixing critical software issues like a dead boot, hanging on the logo, or constant restarts. Why Flash Your Huawei LUA-L02?

Load Firmware: Open the SP Flash Tool and select the Scatter-loading file from your downloaded firmware folder. Flashing Mode: The Huawei LUA-L02 (also known as the Huawei

Huawei LUA-L02: The specific model number. Ensure you have this variant and not LUA-L03, LUA-L11, or LUA-L21. Wrong firmware will hard brick the device.
MT6735M: The exact processor. This is a 64-bit Cortex-A53 quad-core chip with limited RAM (1GB typically). The “M” variant indicates a lower clock speed than the standard MT6735.
Firmware Flash File: The stock ROM package containing system, boot, recovery, cache, and userdata images, plus essential preloader and DSP blobs.
Dead / Hang Logo: Two distinct states. “Dead” means no power, no charging animation, no PC detection (or only as “MTK USB Port”). “Hang Logo” means the phone vibrates, shows the Huawei logo, then freezes or reboots.
Done Repack: A critical phrase. It means the firmware has been modified or recompiled to bypass authentication, remove corrupted partitions, or fix signature mismatches – often necessary for MT6735M devices with damaged NVRAM or secure boot issues.

5. Flashing Process to Resolve Dead Hang

5.1 Preparation

Remove battery (if removable) or disconnect internal flex.
Load scatter file in SP Flash Tool.
Select “Format All + Download” only if preloader is not included; otherwise use “Download Only” with preloader unchecked to avoid anti-rollback or preloader mismatch.

First boot takes 5–10 minutes. Do not interrupt.
If stuck on logo after flash: Reboot to recovery (Vol Up + Power) and perform Factory Reset / Wipe Cache.
IMEI = 0 or NULL: Write back your original IMEI using:
Conclusion:
System image:
Watch this step-by-step guide on how to flash Huawei firmware using the SP Flash Tool to fix boot issues: Huawei LUA-L02 : The specific model number