Hx8872-c Datasheet !link! May 2026

What is the HX8872-C?

The HX8872-C is a TFT-LCD panel timing controller (TCON) or a display driver IC, often used in small to medium-sized LCD panels (e.g., 3.5″ to 7″). It’s typically produced by Himax Technologies (common “HX” prefix). This IC converts incoming video data (like RGB, LVDS, or MIPI) into signals that drive column and row drivers of an LCD.

Производитель : Himax Technologies, Inc. Упаковка/Ящик : TQFP-64. категорий продукта : Интегральные схемы (ИС). Datasheet: HX8872- www.jotrin.ru hx8872-c datasheet

Compact QFN package, ideal for space-constrained applications. AliExpress Application Details What is the HX8872-C

integrates multiple advanced image processing and panel-driving technologies into a single silicon die. 1. Advanced Image Processing No output: verify VCC, EN/SHDN state, and ground connections

Common troubleshooting

• No output: verify VCC, EN/SHDN state, and ground connections.
• Excess current draw: check for input short, incorrect pin wiring, or oscillation — add output damping resistor or small series ferrite.
• Oscillation: add input/output isolation resistors (2–10 Ω), increase decoupling, use recommended layout.
• Poor matching/low power: verify matching network, PCB trace impedance, and load.

4.2 Incorrect Interface Mode (IM Pins)

The IM0–IM2 pins must be hardwired to VDD or GND to select the correct mode. Floating these pins leads to erratic behavior. Common setting: