Jr10-m01 Printer Driver High Quality

The JR10-M01 is the model designation for the Citizen CY-02 and DNP DS-RX1 / RX1HS series of high-volume dye-sublimation photo printers. These are professional-grade thermal printers widely used in photo booths and event photography. 🛠️ Driver & Compatibility

Example: Technical Support Post (Forum / Q&A)

Title: Need Jr10-m01 printer driver – where to find or how to install? Jr10-m01 Printer Driver

Steps for macOS Ventura, Sonoma, or Sequoia:

  1. Download the .dmg package from the official source.
  2. Open the disk image and run the .pkg installer.
  3. Allow the installation in System Settings > Privacy & Security if blocked.
  4. After installation, go to System Settings > Printers & Scanners.
  5. Click “Add Printer” – your Jr10-m01 should appear under the “Bonjour” or “USB” tab.
  6. In the “Use” dropdown, manually select the Jr10-m01 Driver (not AirPrint, if available).
  7. Click “Add” and print a test page.

: If the printer frequently goes offline, Citizen recommends unchecking "Enable bidirectional support" in the "Ports" tab of the Printer Properties. Power Management : In Windows, disabling the "USB selective suspend" The JR10-M01 is the model designation for the

  1. Download the .zip file.
  2. Extract and run Setup.exe.
  3. Connect the printer when prompted.
  4. Print a test page.