MindCuber.com
Build your own LEGO® MINDSTORMS® robot to solve the Rubik's Cube®...
MindCub3r is a robot that can be built from a single LEGO MINDSTORMS EV3 home set (31313) or from EV3 Education Core and Expansion sets (45544+45560) to solve the well known Rubik's Cube puzzle.
All MindCub3r software releases should work with LEGO EV3 firmware versions from v1.06H (home) and v1.06E (Education) onwards. It is recommended that the EV3 firmware is always updated to the latest version released from LEGO.
Construct the robot by carefully following the build instructions (Home) or build instructions (Education) and then download and install the software described below.
MindCub3r software consists of three main parts:
a project file: MindCub3r-v2p2.ev3 or MindCub3r-Ed-v2p2.ev3, containing the motor and sensor control program created using the standard LEGO MINDSTORMS EV3 graphical programming environment
an executable program: mc3solver-v2p2.rtf, compiled from C++ that implements an efficient solving algorithm that can find much shorter solutions than the NXT MindCuber variants
an EV3 application: "MC3 Solver v2p2", that is used to launch the mc3solver-v2p2.rtf program
Note: release v2p2 uses the .rtf extension to enable the files to be downloaded using the standard LEGO MINDSTORMS EV3 software. The .rtf extension is intended to be used for files containing text so using if for the executable program is a work-around. Please do not try to open this file with a text editor.
MindCub3r uses the EV3 color sensor in RGB mode to enable it to measure colors that cannot be distingished by the standard color mode provided by the standard LEGO MINDSTORMS EV3 software. The Color Sensor RGB Block must be imported into the LEGO MINDSTORMS EV3 software to support this mode.
NOTE: LEGO MINDSTORMS EV3 software for Mac OS from version 1.4.0 no longer supports importing blocks such as the ColorSensorRGB block. In this case there is an alternative method to download the MindCub3r software to the EV3 using a micro-SD card.Extract the file from this archive.
On a computer running Windows, find the file in Windows Explorer, click with the right mouse button and select Extract all...
This archive contains:
Start the LEGO MINDSTORMS EV3 software and create a new, empty project.
Select the Tools menu and then Block Import.
In the Block Import and Export dialog, select Browse.
Find the file ColorSensorRGB-v1.00.ev3b on your computer and Open it.
Select ColorSensorRGB-v1.00.ev3b from Select Blocks to Import and then select Import.
To complete the installation, close the dialogs and exit from LEGO MINDSTORMS EV3 software.
Download the appropriate file to your computer:
Note: previous versions are still available here
Extract all the files from this archive.
On a computer running Windows, find the file in Windows Explorer, click with the right mouse button and select Extract all...
This archive contains:
Start the LEGO MINDSTORMS EV3 software and select the File menu then Open Project. Opel Sps Online
Find the MindCub3r-v2p2.ev3 or MindCub3r-Ed-v2p2.ev3 project file and Open it.
Download the MindCub3r program to the EV3 (but do not run it yet).
Select the Tools menu and then Memory Browser.
Select Brick (or SD Card if there is a micro-SD card in the EV3) and find and select MindCub3r-v2p2 or MindCub3r-Ed-v2p2 in the Projects folder and then select Download.
Find the folder on the computer where the files were extracted from MindCub3r-v2p2.zip or MindCub3r-Ed-v2p2.zip. Select mc3solver-v2p2.rtf and Open to download this program to the EV3. Report: Opel SPS Online – Technical Overview and
Select Download again from the Memory Browser dialog.
Find the folder on the computer where the files were extracted from MindCub3r-v2p2.zip or MindCub3r-Ed-v2p2.zip. Select InstallMC3-v2p2.rbf and Open to download this file to the EV3.
Close the Memory Browser dialog.
Go to the Run Recent screen on the EV3.
Press the right button on the EV3 to move to the File Navigation screen. Select the MindCub3r-v2p2 or MindCub3r-Ed-v2p2 folder and press the center button to open it. If there is a micro-SD card in the EV3, select and open the SD_Card folder first. The software will download the calibration file (typically
Use the down button to Select InstallMC3-v2p2 and press the center button to run it. The EV3 will make a short beep.
This installs "MC3 Solver v2p2" application on the Brick Apps screen.
Turn off the EV3 brick to ensure all the files are saved to the flash memory and then turn it on again.
MindCub3r is now ready to use!
Date: [Current Date]
Subject: Analysis of General Motors / Opel’s Service Programming System (Online)
Prepared for: Automotive Technicians, Fleet Managers, Diagnostic Specialists
Subscription Models: Access can often be purchased as short-term (e.g., 2-hour "tokens" or 1-day) or long-term (1-year) professional licenses from providers like Nexus Auto or TechRoute66. AI responses may include mistakes. Learn more Opel TIS2Web SPS - Dealer Account Access - Nexus Auto
Introduction
Click "Next". The software will download the calibration file (typically 2-10 MB). Do not interrupt this process.
GM has been migrating newer vehicles (2021+) to a Service Oriented Architecture (SOA) and OTA (Over-the-Air) updates. However, for older platforms (Pre-2020 Astra, Insignia, Mokka, Combo, etc.), Opel SPS Online will remain the only official reprogramming method for at least the next decade. The increasing integration with Techline Connect (successor to SPS for global GM) suggests that standalone SPS may eventually be phased out in favor of a unified GM diagnostic platform.
| Feature | Opel SPS Online (Official) | Opel SPS Offline (Cracked) | | :--- | :--- | :--- | | Cost | $40-$60 per 24 hours | Free (illegal) | | Safety | High – server validates files | Very Low – corrupted files can destroy ECU | | File Freshness | Latest factory calibrations | Usually 3-10 years old | | VIN Specificity | Automatic, perfect match | Manual, high risk of mismatch | | Immobilizer | Works 100% | Usually fails (no security access) | | Risk of Bricking | Low (with good power) | Very High |
| Component | Minimum Requirement | |-----------|---------------------| | OS | Windows 10 / 11 (64-bit) | | CPU | Core i3 or higher | | RAM | 4 GB (8 GB recommended) | | Storage | 5 GB free space | | Internet | Broadband (10+ Mbps stable) | | Interface | GM MDI, MDI 2, or J2534 clone (partial support) | | Browser | Internet Explorer mode (Edge) or Chrome with NPAPI plugin (legacy) |
Date: [Current Date]
Subject: Analysis of General Motors / Opel’s Service Programming System (Online)
Prepared for: Automotive Technicians, Fleet Managers, Diagnostic Specialists
Subscription Models: Access can often be purchased as short-term (e.g., 2-hour "tokens" or 1-day) or long-term (1-year) professional licenses from providers like Nexus Auto or TechRoute66. AI responses may include mistakes. Learn more Opel TIS2Web SPS - Dealer Account Access - Nexus Auto
Introduction
Click "Next". The software will download the calibration file (typically 2-10 MB). Do not interrupt this process.
GM has been migrating newer vehicles (2021+) to a Service Oriented Architecture (SOA) and OTA (Over-the-Air) updates. However, for older platforms (Pre-2020 Astra, Insignia, Mokka, Combo, etc.), Opel SPS Online will remain the only official reprogramming method for at least the next decade. The increasing integration with Techline Connect (successor to SPS for global GM) suggests that standalone SPS may eventually be phased out in favor of a unified GM diagnostic platform.
| Feature | Opel SPS Online (Official) | Opel SPS Offline (Cracked) | | :--- | :--- | :--- | | Cost | $40-$60 per 24 hours | Free (illegal) | | Safety | High – server validates files | Very Low – corrupted files can destroy ECU | | File Freshness | Latest factory calibrations | Usually 3-10 years old | | VIN Specificity | Automatic, perfect match | Manual, high risk of mismatch | | Immobilizer | Works 100% | Usually fails (no security access) | | Risk of Bricking | Low (with good power) | Very High |
| Component | Minimum Requirement | |-----------|---------------------| | OS | Windows 10 / 11 (64-bit) | | CPU | Core i3 or higher | | RAM | 4 GB (8 GB recommended) | | Storage | 5 GB free space | | Internet | Broadband (10+ Mbps stable) | | Interface | GM MDI, MDI 2, or J2534 clone (partial support) | | Browser | Internet Explorer mode (Edge) or Chrome with NPAPI plugin (legacy) |
See more LEGO robot Rubik's Cube solvers at youtube.com/IAssemble
Copyright © 2013-2020 David Gilday
LEGO and MINDSTORMS are trademarks of the LEGO Group
Rubik's Cube is a trademark of Rubiks Brand Limited
