Orbitor Prospector 100 Metal Detector Manual |verified| May 2026

The manual for the Orbitor Prospector 100 was not just a booklet; it was a relic of 1978, smelling of ozone and basement mildew. Elias found it tucked inside a water-damaged box at an estate sale, right next to the machine itself—a clunky, mustard-yellow contraption with a coil that looked like a plastic dinner plate.

Assemble the Stem: Connect the lower stem to the search coil, then slide it into the middle/upper stem. Tighten the locking collars once adjusted to a comfortable height. Orbitor Prospector 100 Metal Detector Manual

View Meter: A visual indicator that swings to show signal strength. 4. Basic Operation The manual for the Orbitor Prospector 100 was

Power/Volume Knob: Turns the unit on and adjusts the audio signal volume. Tighten the locking collars once adjusted to a

Coil Connection: Attach the search coil to the lower stem using the plastic bolt. Wind the cable securely around the stem and plug it into the control box.

Detection Depth: Typically detects coin-sized objects up to 6–8 inches deep. Power Source: Requires 4 x 9V batteries (not included).

Avoid hitting rocks or the ground, as this can cause "ghost signals". Ground Balance: If your Prospector 100