Pc3000 Install Verified May 2026
The PC-3000 is a professional-grade hardware and software suite developed by ACE Lab used for advanced data recovery and drive repair. Installing the system involves both physical hardware integration and specific software configuration to bypass standard operating system limitations. System Requirements
- ACE Lab Support Portal:
support.acelab.ru - Driver download (registered users):
update.acelab.com
M.2 (NVMe/SATA), mSATA, MicroSATA, and parallel ATA converters. SATA data cables, power cables, and terminal ribbon cables. Intelligent PSU: pc3000 install
Verify the Service
- Press
Win + R→services.msc. - Find PC3000 Service. It should be Running and set to Automatic.
- If stopped, right-click → Start. If it fails to start, re-run the installer with "Repair" option.
Phase 5: The Dongle Dance
Plug your USB dongle (HASP key) into a USB 2.0 port (avoid USB hubs). The PC-3000 is a professional-grade hardware and software
- Launch PC3000: Launch PC3000 from the Start menu or desktop shortcut.
- Activate PC3000: Activate PC3000 using your license key or trial license.
- Update PC3000: Check for updates and install the latest version.
- Configure settings: Configure PC3000 settings, such as setting up user profiles, configuring logging, and adjusting performance settings.
- Ground Yourself: Use an anti-static wrist strap. The PCIe board is sensitive.
- Insert the Card: Locate a free PCIe x1 slot (or larger). Firmly press the card into the slot until it clicks.
- Power Connect: The card requires a standard Molex or SATA power connector from your PC’s power supply. Ensure this is plugged in before closing the case.
- Connect the Ribbon Cables: Connect the two 40-pin ribbon cables to the board. These lead to the "PC-3000 UDMA Main Adapter" where you will plug in the patient drives.