Phison Ps225107ps2307 Mptool Install New! May 2026
To install and use the Phison MPALL (Mass Production Tool) for the PS2251-07 (PS2307)
- Select correct chip/controller (PS2251-07 or PS2307).
- Select the target drive (confirm with Device Manager name).
- Load the firmware file if required (Browse → select firmware).
- Ensure correct settings for mode (e.g., NAND/DRAM parameters, partition config) if present.
Phison MPTool (specifically Phison MPALL or ST-TOOL) cannot be installed like standard software as it runs as a portable standalone application. Flashing or configuring the Phison PS2251-07 (also known as phison ps225107ps2307 mptool install
- Extract the
.raror.zipto a folder on your desktop (e.g.C:\MPTool_PS2307). - Run as Administrator:
Here’s a step-by-step guide to installing and using the MPTool (Mass Production Tool) for Phison PS2251-07 (PS2307) USB flash drive controllers. To install and use the Phison MPALL (Mass
6. Post-Installation & Troubleshooting
| Problem | Likely Fix | |---------|-------------| | "Device not found" | Run as Admin; reinstall USB drivers; check VID/PID in
.inifile. | | Red "Read Only" error | Use Preformat mode with low-level format. | | Tool crashes on start | Extract to a short path (e.g.,D:\MP\). Disable antivirus temporarily. | | Drive size shows 0MB | You need to short the controller pins (hardware mode). | Select correct chip/controller (PS2251-07 or PS2307)Only use this if:
(or the specific version identified by tools like ChipGenius).
Before attempting to install the tool, you must verify that your device uses the specific Phison PS2251-07 (PS2307) controller. Identify the Controller : Use a utility like ChipGenius tool to confirm the "Controller" field shows PS2251-07 (PS2307) Tool Selection : Common tools for this controller include Phison MPALL (e.g., v5.13.0C) or Phison ST-TOOL (specifically versions 3.67, 3.70, or 3.71 for this chip). Step-by-Step Installation and Use Download and Extract