Point-n-measure Digital Tape W5746 User Manual ((new)) File

This post is formatted for a knowledge base, product listing (Amazon, Home Depot), or a support page.

• LCD Screen: Displays measurements.
• ON/OFF Button: Powers the unit and wakes the screen.
• Unit Button (ft/in/m): Toggles between Feet/Inches and Metric.
• Zero/Reset Button: Zeros out the reading.
• Read Button: Activates the Point-N-Measure distance mode.
• Lock Switch: Locks the tape blade in place.

13. Disposal & Recycling

At the end of its useful life, do not dispose of the W5746 in household trash. Point-N-Measure Digital Tape W5746 User Manual

Indirect Measurement (Indirect Distance Calculation via Pythagoras):

1. For inaccessible heights, measure two adjacent sides.
2. Press Mode Button into "Indirect Mode."
3. Input side lengths; the tool calculates the distance.

C. Side & Back