Install Hot! - Remouse Standard Key

Roland Color System Library is Roland's original spot color library. Roland Color System Library consists of more than 1000 spot colors. A special feature of this library is that you can easily create a color chart with your printer.
In contrast to commercially available color charts, this color chart represents the actual colors that "your printer" and "your media" can reproduce (slight color differences is possible to occur depending on the conditions of the printer and media). By selecting colors from this color chart and creating illustrations with these colors, you can accurately reproduce the desired colors.

This section explains about printing the Roland Color System Library color chart and using colors from the library.

Printing a color chart
Printing colors from Roland Color System Library
Registering a Roland Color System Library's color into the application

Printing a color chart

Follow the procedure below to print a color chart of Roland Color System Library.

Install Hot! - Remouse Standard Key

Installation Report: ReMouse Standard

Subject: ReMouse Standard Key Installation & Activation
Software Version: ReMouse Standard (typically v3.x or higher)
Purpose: Guide to successfully install and activate ReMouse Standard using a license key.

Confirm Activation: Click OK or Register. A successful registration will remove trial limitations, such as the 3-loop playback limit. Key Features After Activation remouse standard key install

When you launch ReMouse for the first time, you will see a small grey window titled "ReMouse Standard - Unregistered." Cause: You did not run the installer as Administrator

To effectively install and activate a ReMouse Standard license key, you must follow a specific sequence of actions within the software's graphical interface. ReMouse is a specialized automation utility designed to record and play back sequences of mouse and keyboard actions, saving them as script files for future use. Installation and Activation Process remouse standard key install

Error 2: "Failed to write to registry"


See Also
Setting the Layout
Configuring the Print Quality
Configuring the Color Settings
Using Spot Colors


Back to top

Printing colors from Roland Color System Library

You can use the spot colors in the Roland Color System Library for printing in the same way as using other spot colors. See the link below for more information.
remouse standard key installPrinting with spot colors

Back to top

Registering a Roland Color System Library's color into the application

You can load Roland Color System Library's colors into the color palette of your application. This is very useful, as this allows you to quickly select the spot colors from the color palette.
VersaWorks comes with palette data for some applications. You can register this palette data in your application. Currently, swatch libraries for Adobe Illustrator 10, CS, CS2, and CS3, and for CorelDRAW 11, 12, and X3 are available.
Swatch Library files are stored in the RIP Server (the computer with VersaWorks installed). These files should be copied to computers with Adobe Illustrator or CorelDRAW installed. The procedures are the same for both Windows and Macintosh clients.

When using Adobe Illustrator 10, CS, CS2, or CS3

  1. Open the folder [C:\Program Files\Roland VersaWorks\Swatch\Illustrator] in the RIP server (computer with VersaWorks installed).
  2. Copy the file [Roland Color System Library.ai] to [Swatch] (or [Swatch Library]) folder under the Adobe Illustrator installation folder.
    If the target computer is different from the RIP Server, use the network or other external storage device (USB drive or floppy disk).
  3. Launch Illustrator on the target computer.
  4. In Adobe Illustrator, click the menu item [Window] - [Swatch Library] - [Roland Color System Library].

When using CorelDRAW 11, 12, or X3

  1. Open the folder [C:\Program Files\Roland VersaWorks\Swatch\CorelDRAW] in the RIP server (computer with VersaWorks installed).
  2. Copy the [userinks.cpl] file.
    If the target computer is different from the RIP Server, use a network or an external storage media (such as a USB drive or floppy disk) to copy the file.
  3. Launch CorelDRAW on the target computer.
  4. In the CorelDRAW menu, click [Tools] - [Palette Editor].
    The Palette Editor dialog box appears.
  5. Click the [Add Color] icon.
    The [Select Color] dialog box appears.
  6. Select the [Palettes] tab.
  7. Select [Custom Spot Colors] from the [Palette] drop down list.
  8. Click the icon (File Open) next to the drop down list.
  9. Select the file [userinks.cpl] copied in step 2 and click [Open].
  10. Select the colors from the list that you want to add to [Custom Spot Colors] and click the [Add to Palette] button.
  11. Click [Close] to close the [Select Color] dialog box.
  12. Click [OK] to close the [Palette Editor] dialog box.
  13. Delete the [userinks.cpl] file you copied in step 2.
  14. Relaunch CorelDraw.


See Also
Printing from Other Computers


Previous pageBack to topNext page