The Samsung Galaxy S10 (SM-G973F/DS) Go to product viewer dialog for this item.
Step 5: First Boot
The standard method for flashing firmware on the Galaxy S10 is using the Odin tool (Windows only). samsung galaxy s10 sm-g973f ds firmware
If you are flashing the firmware manually, you will need the following:
To install firmware manually, you must use the Odin tool on a Windows PC [5.8]. Preparation: Install Samsung USB Drivers. The Samsung Galaxy S10 (SM-G973F/DS) Go to product
There are several types of firmware updates available for the Samsung Galaxy S10 (SM-G973F/DS), including:
| Error | Cause | Solution |
|-------|-------|----------|
| SW REV CHECK FAIL | Trying to downgrade to an older bootloader. Samsung prevents this. | You must flash firmware with the same or higher binary (bootloader version). |
| Complete(Write) operation failed | Corrupted file or bad USB connection. | Re-download firmware, switch USB ports, or use a different cable. |
| Auth (CSC) fail | Wrong CSC for your device. | Ensure you downloaded SM-G973F DS firmware, not G973U (US Snapdragon). |
| PIT partition error | Partition mismatch. | Do not check “Re-Partition.” If needed, flash a PIT file (advanced users only). | Preparation: Install Samsung USB Drivers
Critical distinction: SM-G973F (single SIM) and SM-G973F/DS (dual SIM) share the same firmware binaries but use different CSC (Consumer Software Customization) binaries to enable dual SIM functionality.
