Sc673-10 Ricoh Error
error is a communication failure between the device's main controller and the Smart Operation Panel
Notes for Technicians
- SC673-10 is often logged alongside SC672-11 or SC672-12, but those relate to controller-panel startup timeout. SC673-10 is more specific to a missing response from the panel.
- After replacing parts, perform a memory clear (only if recommended by Ricoh support) and reload firmware.
If the error persists after checking settings and cables, professional service may be required to replace: sc673-10 ricoh error
- Hold down
Check Status+Stop+Powerwhile turning on. - If panel shows a dim backlight but no text, the panel CPU is alive but storage is corrupt.
Step 3 – Check for blink codes on panel PCB
Remove the rear cover of the operation panel (4 screws). Locate the green LED (D1 or D2) near the main IC: error is a communication failure between the device's
Restart: Turn the machine off and back on to complete the reset process. Hardware Causes to Investigate SC673-10 is often logged alongside SC672-11 or SC672-12,
