Sc67310 Ricoh Error !!top!! Free
Technical Bulletin: Resolving Ricoh SC-673-10 (Operation Panel Communication Error)
1. Error Definition
SC-673-10 indicates a communication failure between the Controller Board (CTL) and the Operation Panel (OPE) of the device. Specifically, the sub-code “10” often points to a data handshake timeout or a corrupted parameter during the panel’s boot-up sequence.
- If the paper is blank or misfed, the fuser might not be heating properly. Replace the fuser if it’s faulty.
- Check for overheating or error codes related to the fuser (e.g., EC or E-110 codes may appear alongside SC67310).
- Update the firmware via the Ricoh support website or a USB drive.
- Perform a hard reset (refer to the manual for instructions).
Communication lags that prevent the operation panel keys from functioning correctly. How to Get "Error Free" sc67310 ricoh error free
C. Sensor Contamination
The sensor detecting the web position may be covered in toner dust, causing a false "stop" signal. If the paper is blank or misfed, the
