Sharp Atomic Clock Spc373 User Manual !exclusive!

Sharp Atomic Clock SPC373 Go to product viewer dialog for this item.

Snooze: When the alarm sounds, press the SNOOZE/LIGHT button on top for a 5-minute delay. 5. Troubleshooting Common Issues The "Tower" Icon is Gone sharp atomic clock spc373 user manual

  1. Insert Batteries: Insert the batteries into the clock, following the polarity markings.
  2. Place the Clock: Place the clock in a location with good reception of the radio signal.
  3. Turn On the Clock: Turn on the clock and wait for it to synchronize with the atomic clock signal.
  4. Set the Time Zone: Set the time zone according to your location.
  5. Set the Date and Time: The clock will automatically set the date and time, but you can also set it manually if needed.

1. Product Overview & Key Features

The Sharp SPC373 is a desktop or wall-mountable atomic clock designed for home or office use. Its key features include: Sharp Atomic Clock SPC373 Go to product viewer

Confirm: Press TIME after each adjustment to move to the next setting and to save once finished. Alarm Functions Insert Batteries : Insert the batteries into the

To manually force a signal search:

  1. Press and hold the “WAVE” or “SEARCH” button (location: back or top edge – check your model) for 3 seconds.
  2. The tower icon will flash.
  3. Place the clock near a window, away from electronics (TVs, routers, microwaves).

Problem: Temperature reading is wrong.
Solutions:

Title: Need Help with Your Sharp Atomic Clock SPC373? Check Out Our User Manual Guide!