Sp Flash Tool Stuck At Download Updated Da 100 -

If you are trying to unbrick or flash your MediaTek (MTK) device and the SP Flash Tool is stuck at "Download DA 100%", you are stuck at the most common hurdle in Android flashing.

1. Hold Power + Volume Up for 15 seconds to discharge residual capacitance.
2. Let the phone sit disconnected for 30 seconds.
3. Click "Download" in SPFT.
4. Then connect the USB cable.
5. If still stuck, try the "Dead Boot" method:

   Fix #6: Bypass Battery and Preloader (The "Test Point" method)

   If the phone is stuck in a bootloop or dead, the preloader might be corrupted. sp flash tool stuck at download da 100

   Here’s the complete text for the common error: If you are trying to unbrick or flash

   The process flow is:

   1. Open SP Flash Tool, load scatter file and DA.
   2. Click Download (or F9).
   3. Now connect the powered-off phone (battery should be >50%).
   4. If the tool hangs at DA 100%, immediately disconnect, power off, and try again – but this time click Download then hold the phone's Volume Up or Volume Down button while connecting.

   Sometimes the tool is trying to talk to the phone at the wrong "speed." Hold Power + Volume Up for 15 seconds