Thyssenkrupp Levant Stair Lift Installation Manual • No Survey
This is a useful guide for installing a ThyssenKrupp Levant stairlift (commonly sold under the ThyssenKrupp Access brand, now part of TK Home Solutions).
Tools Required: You will typically need a cordless drill, level, hacksaw, various Allen wrenches, a Phillips screwdriver, and a nut driver. thyssenkrupp levant stair lift installation manual
Phase 4: Attaching the Seat, Armrests, and Footrest
- Seat post slides into the carriage receiver. Tighten the locking knob to 15 Nm.
- Flip-up footrest: Ensure the gas spring is pre-loaded (the manual shows a 30° pre-angle).
- Armrests: Left and right are labeled. Do not swap—the swivel lock mechanism is side-specific.
- Locate limit trip cams on the rail (near ends).
- With power off, manually move carriage to top – adjust cam so carriage stops before hitting end caps.
- Repeat at bottom – allow at least 1″ clearance above floor/landing.
- Test with power on at slow speed (if adjustable).
Before starting, ensure your staircase is ready for the Levant series: Power Source This is a useful guide for installing a
By following the guidelines and instructions outlined in this article, you'll be well on your way to a successful ThyssenKrupp Levant stair lift installation. Seat post slides into the carriage receiver