Traice Dvr Password Reset -

If you have lost the password for your Traice DVR (often associated with the XMeye or generic H.264 platforms), you can regain access using several common methods. 1. Try Default Credentials

If these methods fail, Traice often requires a serial number and the current system time to generate a secure unlock code. You may need to contact your local installer or the vendor's tech support email with: Model Number Serial Number (found on a sticker on the bottom or back) The exact date/time currently displayed on the DVR monitor. EverFocus USA traice dvr password reset

Username: admin | Password: 123456, admin, 000000, 111111, or leave it blank. Username: root | Password: root or 123456. 2. Software Reset (SADP or QR Code) If you have lost the password for your

• Physical Inspection: Check the sticker on the bottom or side of the unit for a model number (often starting with models like "TR-" or generic OEM numbers).
• Interface Check: Navigate to the Main Menu > System Info (or About).
• Visual Confirmation: Most Traice DVRs run on a generic embedded Linux interface common to many budget OEM brands. If the interface asks for a "Safety Code" or "Answer" after entering a wrong password, the "Master Code" method (Section 3) is applicable.

Common reset methods (ranked by safety and likelihood of success)

1. On-device password recovery options (safest)
2. Web UI / mobile app account recovery (if cloud/account linked)
3. Backdoor/default credentials (quick but insecure)
4. Hardware/software reset via jumper/press-and-hold (effective; may factory-reset)
5. Serial / USB console or UART access (advanced; high success)
6. Manufacturer support / authorized service (reliable; may require proof)
7. Firmware reflash / exploit-based resets (risky, may brick device)

Username: 666666

Short the Pins: Use a screwdriver or tweezers to connect the two pins while powering the unit back on. Hold for 15–30 seconds until you hear a beep. Physical Inspection: Check the sticker on the bottom

Because Traice is a re-brander (often using HiSilicon or Novatek chips), the reset tool is the same as for generic DVRs.

If the date method fails, you can use the device's unique serial number.