Urtc 1000 Driver Windows 10 May 2026

How to Install the URTC 1000 Driver on Windows 10 (Solved)

If you are trying to connect a URTC 1000 device (often a USB video capture card or audio interface) to a Windows 10 PC, you might have run into the dreaded "Driver not found" or "Device not recognized" error.

Step 1: Identify the Correct Hardware

The "URTC 1000" typically refers to a USB 2.0 HDMI/AV Capture Dongle using the Macrosilicon MS2100 or EMPIA chipset. Before installing, check your Device Manager: urtc 1000 driver windows 10

1. Open Device Manager > Sound, video and game controllers.
2. Right-click eMPIA Video Capture > Uninstall device.
3. Check Delete the driver software for this device.
4. Also remove any remnants under Universal Serial Bus devices.
5. Run pnputil /enum-drivers in CMD to find and delete leftover .inf files with eMPIA or em28xx.

• Official vendor driver: preferred. Look for a driver package on the manufacturer’s support/downloads page matched to URTC 1000.
• Chipset drivers: Many “URTC” devices are USB-to-serial or use common UART bridge chips (FTDI, Prolific, Silicon Labs CP210x, CH340). If manufacturer driver is unavailable, match the device VID/PID to one of these vendors and install that vendor’s signed Windows 10 driver.
• Generic Windows driver: Windows Update sometimes provides a compatible driver automatically after connecting the device.
• Compatibility layer: If only legacy (XP/Vista) drivers exist, they may fail on 64-bit Windows 10 because of driver signing; use signed drivers or test-signed mode only as last resort.

• Very cheap ($10–15 USD).
• Works with OBS, Zoom, Discord once driver is installed.
• Supports both RCA and S-Video.

• The original CD contents (if available).
• Archive.org snapshots of generic capture card support pages.
• GitHub repositories (e.g., “em28xx-new” project).