Xc2003 Controller Manual !!top!! -

Atlas Copco XC2003 is a powerful, intuitive controller designed for the "versatility range" of mobile air compressors. It allows operators to manage multiple applications—from powering handheld tools at 7 bar to sandblasting at 10 bar—using a single machine.

|---[Start X0]---[Stop X1]-----------------(Y0)---|

1. Hook the top slot of the controller onto the top edge of the DIN rail.
2. Push the bottom of the controller upwards until it clicks into place.
3. To remove, pull down on the bottom latch using a flathead screwdriver and lift the unit off the rail.

• Pay attention to max supply voltage, recommended operating voltage range, and maximum continuous/peak current. Exceeding these kills the board.
• Note logic input voltage levels — if your microcontroller uses 3.3V logic, confirm the XC2003 recognizes it as HIGH.

The XC2003 controller manual provides detailed information on the hardware and software configuration, installation, operation, and maintenance of the controller. The manual typically includes the following sections: xc2003 controller manual

4.2 Wiring Diagrams