Xmtk-9000 User Manual Best -

is a precision PID temperature controller primarily used in industrial machinery, such as hot melt adhesive applicators for plastic pipe manufacturing and food processing ovens

• Power Isolation: Always disconnect mains power before wiring output terminals (relays, SSR drivers, or 0-10V outputs).
• Environmental Limits: Do not operate above 85% relative humidity (non-condensing) or ambient temperatures exceeding 60°C (140°F).
• Wire Gauge: Use 14–22 AWG shielded wire for sensor inputs. Unshielded wire in high-EMI environments will cause erratic readings.
• Output Overload: Do not exceed 250V AC / 3A resistive on relay outputs. For inductive loads (motors, solenoids), use an external contactor.

The controller interface consists of a SET key and directional keys for parameter adjustment. Setting the Target Temperature (SV): Press the SET key once. The SV display will begin to flash. xmtk-9000 user manual

• 4-Zone independent PID temperature control (±0.1°C accuracy)
• Dual 24-bit ADC data logging (up to 10,000 samples/second)
• Modbus RTU/TCP and RS-485 industrial communication
• 7-inch capacitive touch HMI with gesture support

6.2 Exporting Data

• Connect a FAT32-formatted USB flash drive to the front port (max 32 GB).
• Navigate to File Manager > Export CSV.
• The file naming follows: LOG_YYMMDD_HHMMSS.csv.